- Makeexpand_more
- radio_button_uncheckedBeta(1)
- radio_button_uncheckedBombardier(1)
- radio_button_uncheckedGas Gas(10)
- radio_button_uncheckedHonda(15)
- radio_button_uncheckedHusaberg(5)
- radio_button_uncheckedHusqvarna(18)
- radio_button_uncheckedKawasaki(11)
- radio_button_uncheckedKTM(21)
- radio_button_uncheckedPolaris(1)
- radio_button_uncheckedSuzuki(13)
- radio_button_uncheckedUni(1)
- radio_button_uncheckedUniversal(7)
- radio_button_uncheckedYamaha(9)
- Priceexpand_less
- min$0
- max$1,650
.jpg)
Magnet Kit: KTM motorcycles.
Voyager/Vapor Ignition Sensor 2550mm Length (100").
Type
Voyager & Vapor ignition Sensor
Physical Features
Wire Length 1800mm
(70.87%u201D)
Speed sensor cable extension 600mm (24") long.
Type
Extension for Speedometer Cable Male to Female
Physical Features
Wire Length 600mm
(24%u201D)
Temperature sensor extension lead 600mm (24") long.
Type
Extension for Temperature Sensor Male to Female
Physical Features
Wire Length 600mm
(24%u201D)
Temperature sensor extension lead 1800mm (72") long.
Type
Extension for Temperature Sensor Male to Female
Physical Features
Wire Length 1800mm
(72%u201D)
Temperature sensor extension lead 1200mm (48") long.
Type
Extension for Temperature Sensor Male to Female
Physical Features
Wire Length 1200mm
(48%u201D)
Voyager/Vapor Ignition Sensor 1800mm Length (70.87in).
Type
Voyager ignition Sensors
Physical Features
Wire Length 1800mm
Mounting bracket for Vapor/Striker, vertical surface attachment.
Ideal for mounting to KTM.
Domino Kill Switch
#0250AB.9B
Domino Kill Switch with wiring, functions: engine stop
Connector: tipo Molex 2 vie p/m
Cable length: 690 mm
Domino Start Switch
#0254AB.9B
Domino Start Switch with wiring, functions: engine start
Connector: Sumitomo 2 vie P/M
Cable length: 430 mm
Are you in need of long hoses for your Trail Tech Portable Off-Road Air Compressor? Look no further! Our long hoses will be the perfect addition to your off-roading kit. Here are some reasons why:
- Increased Reach: With longer hoses, you'll be able to reach your tires even if they are further away from the compressor. This makes it easier to fill up your tires and get back on the road or trail.
- Versatility: Longer hoses give you more flexibility when it comes to inflating different tires. Whether you need to inflate the tires on your ATV, truck, or trailer, our long hoses will be able to handle the job.
- Durability: Our hoses are made with high-quality materials that are designed to withstand the wear and tear of off-roading. You can be confident that our hoses will hold up even in rugged terrain.
- Convenience: Our long hoses come with quick-connect fittings that make it easy to attach them to your Trail Tech Portable Off-Road Air Compressor. This means you'll be able to set up and inflate your tires quickly and easily.
Investing in a pair of long hoses for your Trail Tech Portable Off-Road Air Compressor is a smart move for any off-road enthusiast. Don't let a lack of reach hold you back from exploring the trails. Order your long hoses today and experience the convenience and versatility they offer!
- Hose Length: 15" (480mm)
- Material: Rubber with braided nylon covering
- Valve Type on Hoses: One hose with Schrader screw, the other hose with lock-on air chuck for Schrader valves. Compatible with Presta adapter and ball needle in Trail Tech Portable Air Compressor kits.
Voyager/Vapor handlebar mounting hardware. Included in every Voyager kit. Fits 1-1/8'' - 7/8'' handlebars.
Positions Voyager/Vapor in the center of the controls, in the safe zone below the bars.
Type
Handlebar Mounting Hardware For Voyager GPS
Physical Features
Handlebar Diameters 7/8''
1-1/8''
Voyager Top Triple Clamp Mount Bracket for perches bolted on and 100-106mm spacing.
Triple clamp mounting bracket. Mount Voyager to front of triple clamp of most off-road motorcycles.
Fits most KTMs and other motorcycles where the number plate screws into the front of the triple clamp. If a headlight or number plate spacer is present, there should be plenty of room. On some models with a very close number plate, some modifications may be necessary (add spacer or notch the number plate.)
Digital gauge sold separate.
Voyager Pro plastic handlebar mounting hardware kit for 7/8 and 1-1/8 bars.
Included in Voyager Pro kits.
Patented mount design has two points of articulation, enabling a wide variety of mounting positions.
Made from special high strength materials to withstand the rigors of powersports.
Includes screws and bolts to attach a Voyager Pro dock.
Comes with four M4x14mm screws to attach the Voyager Pro dock.
Included in Voyager Pro kits.
Voyager Pro GPS unit not included.
Fits:
KTM 08-10 ATV XC/SX 450/505/525
Honda Rancher (4WD)
Yamaha All Years TW200
Yamaha 87-09 Banshee
Yamaha 87-06 Blaster
Yamaha 08-15 Grizzly 450/700
Yamaha 05-15 Raptor 250/250R/350
Yamaha 01-05 Raptor 660
Yamaha 06-15 Raptor 700
Yamaha 85-04 Warrior
Yamaha 95-10 Wolverine
Yamaha 04-14 YFZ450
Yamaha 09-15 YFZ450R/X
Yamaha 04-08 Rhino UTV
Suzuki All Years LT-Z 400
Suzuki 06-09 LT-R 450
Kawasaki 02-08 KFX 400
Kawasaki 08-15 Teryz UTV
Polaris 06-12 Outlaw 450/500/525
Polaris 03-08 Predator
Polaris All Years Trailblazer (2WD)
Polaris All Years Trail Boss
Polaris 14-15 Scrambler 850
Polaris 08-15 Ranger RZR/RZRS/RZR4/RZR 800/900/1000 UTV
Bombardier 00-08 DS 650
Artic Cat 13-15 Wildcat 1000
Drum Brakes
CAN AM 08-13 DS 450
Physical Features
Wire Length 1350mm
(53%u201D)
Fits:
Generic Conventional Forks
Physical Features
Wire Length 1450mm
Fits:
Generic Inverted Forks All Years
Physical Features
Wire Length 1450mm
(57%u201D)
Temperature Sensor: Cylinder Head 10mm CHT Sensor for air cooled machines.
Type
Engine Temperature Air Cooled Machines
Spark Plug or Engine Bolt
Physical Features
Wire Length 550mm
(21%u201D)
Diameter 10mm
Temperature Sensor: 22mm Inline Water Temp Sensor.
Type
Engine Temperature Water Cooled Machines
Inline
Physical Features
Wire Length 900mm
(35%u201D)
Diameter 22mm (0.87")
