Trail Techs TTO Temperature Switching Fan Kit monitors your KTM & Husqvarnas cooling system performance and automatically activates the fan to keep engine at optimum temperature range.

- Custom adjustment of temperature trigger point

- No cutting of fluid lines with included fin sensor

- 30 watt draw

- 4 Inch fan

- 12V DC ONLY

- Temperature: (-)40 to 300 Degrees Celsius

- Physical Weight: 652 Grams

- Physical Dimensions: 109 x 109 x 48mm

NOTE: Please make sure bike has necessary power available.

On bikes that have a regulated thermostatically controlled harness (this includes all new KTM and Husqvarna EFI 2 strokes) you will need to install the included wire harness back to the battery and attached the fan kit to that wire harness.

Contents

A Inch SPAL Fan: 7051-FN1

TTV Temperature Gauge: 732-S00

Radiator Bracket: 7051-BR11

Temperature Sensor: 7500-3007

Wire Harness: 732-WH1

The TTO Digital Temperature Gauge allows you to easily monitor your engine's temperature ensuring you that your engine is not over heating.

• Easy to read LCD display and an ultra-thin design.
• The LCD display lets you to easily view all gauge readings regardless of the angle or lighting conditions.
• Surface mount for easy install, comes with double sided VHB tape or can be bolted on
• -40°-300°C/575°F
• Black case, orange version sold separate

Battery Life 5 Years

Domino Switch Block

Side: Left

Functions: horn, tree position lights, low/high beam, turn

Connector: Molex 9 vie P/M

Cable length: 550mm

Domino Switch Block

#0298AA.8B

Functions: horn, off/low/high, engine stop, turn, with 1 m long wire harness without connector

Application: Universal

Connector: None

Cable length: 1 m

Domino Engine Start/Kill Switch

Functions: Engine stop, Engine start

Bike typology: Universal

Connector: Molex 4 vie P/M

Cable length: 590 mm

Temperature Sensor: 25mm Inline Water Temp Sensor.

Type

Engine Temperature Water Cooled Machines

Inline

Physical Features

Wire Length 900mm

(35%u201D)

Diameter 25mm (0.98")

Trail Techs TTV Temperature Switching Fan Kit monitors your KTMs cooling system performance and automatically activates the fan to keep engine at optimum temperature range.

Custom adjustment of temperature trigger point.

- Plugs into most stock KTM harnesses

- No cutting of fluid lines

- 30 watt draw

CONTENTS

4 Inch SPAL Fan: 7051-FN1

TTV Temperature Gauge: 732-S00

Radiator Bracket: 7051-BR11

Temperature Sensor: 7500-3005

Wire Harness: 732-WH1

12V DC ONLY

Temperature: (-)30 to 300 Degrees Celsius

Physical Weight: 652 Grams

Physical Dimensions: 210 x 120 x 85mm

Head Unit Only (No Sensors).

Can be mounted on cross / enduro / motard / ATV / moped / trial

DETAILS:

No power supply required

Simple installation with double-sided tape

Battery included

It turns on automatically with the engine%u2019s vibrations

2 hour-counter functions: 1 total 1 partially resettable

Lock function to prevent its activation during transport

Waterproof IP68

Possibility to improve or reduce sensitivity

0.1 hour resolution

Wireless operation

• 100 Watt DC
• Trail Tech stators replace the OEM stator.
• Trail Tech stators increase power output significantly.
• Custom made by Trail Tech, not purchased from bike manufacturers and rewound.
• DC stators compatible with Trail Tech lighting systems of equal or lesser power
• Manufactured with superior craftsmanship and performance for serious riders

Temperature Sensor: 19mm Inline Water Temp Sensor.

Type

Engine Temperature Water Cooled Machines

Inline

Physical Features

Wire Length 550mm

(21%u201D)

Diameter 19mm (0.75")

Voyager/Vapor handlebar mounting hardware. Included in every Voyager kit. Fits 1-1/8'' - 7/8'' handlebars.

Positions Voyager/Vapor in the center of the controls, in the safe zone below the bars.

Type

Handlebar Mounting Hardware For Voyager GPS

Physical Features

Handlebar Diameters 7/8''

1-1/8''

The Connected Riders GPS

The next evolution of Trail Techs most popular off-road GPS.

Featuring patent pending Buddy Tracking*, Bluetooth for phone and media connection, 4 Inch colour touchscreen, and full vehicle integration. See the data that matters most to you.

TRACKS AND WAYPOINTS

Record Tracks

GPX File Import and Export

Drop Customised Waypoints

Set Waypoints as Destination

Personalise Map Layer Colours

Plan & Record Entire Trail Systems

BUDDY TRACKING

Ride group visible on map

Up to 20 Buddies per Ride Group

Long range (depending on terrain)

Emergency Beacon Flashes Red on Friends Screens

Personalise Your Buddy Icon Colour and Name

Upgrade Buddy Antenna for Longer Range

Cellular service not required

MINI-MENU

Tracks

Waypoints

Map Layers

Map Options

Buddy Tracking Setup

1. What maps come standard with Voyager Pro?

Voyager Pro is pre-loaded with maps of the USA.

2. How do I upload different country and region maps to Voyager Pro?

Download maps from our website for free: https://www.trailtech.net/software/

3. What types of Tracks/Routes/Waypoints can I upload to my Voyager Pro?

Voyager Pro accepts tracks, routes, and waypoints in GPX format.

4. Can I use Voyager Pro without vehicle sensors?

Yes, you can use Voyager Pro without any sensors connected, but a 12v DC power connection is required. However, integrating with the vehicle provides you visibility to several key features (engine temperature, battery voltage, tachometer, and wheel speed).

5. How does Voyager Pro display speed?

All speed and distance data can be gathered using GPS or the wheel sensor. For the most accurate readout, we recommend using the wheel sensor.

6. How do I connect Voyager Pro to power?

Voyager Pro requires 12v DC power. Connecting Voyager Pro to AC power will damage the unit and void the warranty.

For applications where DC power is not available, Trail Tech offers an AC wall charger to charge the internal battery (internal battery life is ~45 minutes.)

7. Can Voyager Pro be turned on/off manually?

Yes, hold the upper left button to power Voyager Pro on/off.

8. How do I get the best GPS reception possible?

The internal antenna is designed for optimum reception when installed with a clear view of the sky. Some installations may require mounting under or near metal objects that would block the signal, and in these instances an external antenna (9000-EAA) should be installed.

9. Can I use the same sensors on my Voyager GPS with the new Voyager Pro?

Yes, the Voyager Pro uses the exact same sensors as all other Trail Tech gauges. Note: The power input on the Voyager GPS accepts a wider voltage range. Please double-check that it 2019s 12v DC power.

10. How does buddy tracking work?

Buddy tracking uses long range radio frequencies to connect multiple riders and display each rider as an icon on the screen.

The external antenna is required for buddy tracking to function properly.

11. How far is the range between riders when using buddy tracking?

The range varies depending up the terrain. We typically see between .5 and 1.5 miles of range. The range improves with better line of sight.

12. In what regions of the world is buddy tracking currently enabled?

North America, Central America, South America, and Australia / New Zealand.

Kit Contents

25mm Water Sensor: 7500-3076

Magnet Kit: 704-01

Wheel Sensor: 704-06

Mounting: 9200-1000

Power Lead: 9000-1011

Ignition Sensor: 9000-1021

Dock: 9200-DOCK

Buddy Tracking Antenna: 9200-V2V1

• Universal tachometer with RPM reader, launch control and shift warning functionality              
• LEDs allow you to read revolutions per minute (RPM) in real time, giving you full control
• The Launch Control function ensures the rider gets the perfect start, thanks to LEDs that indicate the ideal moment to start at maximum power and control, depending on one's preferences
• The shift warning function uses LEDs to signal the rider the right time to shift gears and release full engine power. the LEDs will flash at the desired rpm
• Equipped with a convenient button for adjusting the necessary settings, which can be positioned on the handlebars
• Front guard integrated into the aluminum support base, with the protective function from bumps and debris
• Water-resistant
• Applies to the front of the fender, via an aluminum bracket and screws in the mounting kit
• Can be applied to any fender, with direct power supply to the battery. RPM reading is via electrical pulses detectable from the spark plug power cable
• Printed logo on tachometer and lasered on bracket

Are you in need of long hoses for your Trail Tech Portable Off-Road Air Compressor? Look no further! Our long hoses will be the perfect addition to your off-roading kit. Here are some reasons why:

1. Increased Reach: With longer hoses, you'll be able to reach your tires even if they are further away from the compressor. This makes it easier to fill up your tires and get back on the road or trail.
2. Versatility: Longer hoses give you more flexibility when it comes to inflating different tires. Whether you need to inflate the tires on your ATV, truck, or trailer, our long hoses will be able to handle the job.
3. Durability: Our hoses are made with high-quality materials that are designed to withstand the wear and tear of off-roading. You can be confident that our hoses will hold up even in rugged terrain.
4. Convenience: Our long hoses come with quick-connect fittings that make it easy to attach them to your Trail Tech Portable Off-Road Air Compressor. This means you'll be able to set up and inflate your tires quickly and easily.

Investing in a pair of long hoses for your Trail Tech Portable Off-Road Air Compressor is a smart move for any off-road enthusiast. Don't let a lack of reach hold you back from exploring the trails. Order your long hoses today and experience the convenience and versatility they offer!

• Hose Length: 15" (480mm)
• Material: Rubber with braided nylon covering
• Valve Type on Hoses: One hose with Schrader screw, the other hose with lock-on air chuck for Schrader valves. Compatible with Presta adapter and ball needle in Trail Tech Portable Air Compressor kits.

Trail Techs TTO Temperature Switching Fan Kit monitors your KTM cooling system performance and automatically activates the fan to keep engine at optimum temperature range.

- Custom adjustment of temperature trigger point

- No cutting of fluid lines with included fin sensor

- 30 watt draw

- 4 Inch fan

- 12V DC ONLY

- Temperature: (-)40 to 300 Degrees Celsius

- Physical Weight: 652 Grams

- Physical Dimensions: 210 X 120 X 85MM

Contents

A Inch SPAL Fan: 7051-FN1

TTV Temperature Gauge: 732-S00

Radiator Bracket: 7051-BR06

Temperature Sensor: 7500-3005

Wire Harness: 732-WH1

Trail Techs TTO Temperature Switching Fan Kit monitors your Hondas cooling system performance and automatically activates the fan to keep engine at optimum temperature range.

- Custom adjustment of temperature trigger point

- No cutting of fluid lines

- Fused Wire Harness

- 30 watt draw

- 4 Inch fan

- 12V DC ONLY

- Temperature: (-)40 to 300 Degrees Celsius

- Physical Weight: 652 Grams

- Physical Dimensions: 210 X 120 X 85MM

Contents

A Inch SPAL Fan: 7051-FN1

TTV Temperature Gauge: 732-S00

Radiator Bracket: 7051-BR03

Temperature Sensor: 732-TS1

Wire Harness: 732-WH1

New Design Resettable Front Button TTO is a digital tachometer and hour meter that works on all gasoline engine

The number of hours an engine has been running is critical to its maintenance schedule. Attach one to your motorcycle, ATV or lawn-mower and be aware of upcoming service requirements.

TTO is the smallest available meter at 50x25x14mm and has large, easy to read digits. Easily mount it to any surface using either the bolt-on (Screws not included) or peel-n-stick mounting options.

*Accumulated Run Time HRS 0-99999 Hours(Non-Resettable)

*Maintenance Reminder Run Time Wrench Icon with HRS 0-999 Hours (Resettable)

*Engine Speed RPM 0-19999 rpms (In Real Time)

*Max RPM Read Out - (Resettable)

*Internal Battery - Battery Life 5 Years

*Screen Size 25.5 x 13.4mm

*Physical Dimensions 25x50x14mm WxHxD

*Physical Weight 39.3 grams

The TTO Digital Temperature Gauge allows you to easily monitor your engine's temperature ensuring you that your engine is not over heating.

• Easy to read LCD display and an ultra-thin design.
• The LCD display lets you to easily view all gauge readings regardless of the angle or lighting conditions.
• Surface mount for easy install, comes with double sided VHB tape or can be bolted on
• -40°-300°C/575°F
• Black case, orange version sold separate

Battery Life 5 Years

Trail Techs TTV Temperature Switching Fan Kit monitors your KTM or Husqvarnas cooling system performance and automatically activates the fan to keep engine at optimum temperature range.

Custom adjustment of temperature trigger point.

- Plugs into most stock KTM harnesses

- No cutting of fluid lines

- 30 watt draw

- 4 Inch fan

- 12V DC Only

- Temperature: (-)40 to 300 Degrees Celsius

- Physical Weight: 652 Grams

- Physical Dimensions: 210 X 120 X 85MM

Contents

4 Inch SPAL Fan: 7051-FN1

TTV Temperature Gauge: 732-S00

Radiator Bracket: 7051-BR05

Temperature Sensor: 7500-3005

Wire Harness: 732-WH1

Voyager Top Mount Protector

Protector works Voyager ONLY Not Voyager Pro.

Protector will include the External Antenna 9000-EAA

Trail Techs TTV Temperature Switching Fan Kit monitors your Hondas cooling system performance and automatically activates the fan to keep engine at optimum temperature range.

Custom adjustment of temperature trigger point.

- Fused Wire Harness

- No cutting of fluid lines

- 30 watt draw

- 4 Inch fan

- 12V DC ONLY

- Temperature: (-)40 to 300 Degrees Celsius

- Physical Weight: 652 Grams

- Physical Dimensions: 109 x 109 x 48mm

Contents

4 Inch SPAL Fan: 7051-FN1

TTV Temperature Gauge: 732-S01

Radiator Bracket: 7051-BR12

Temperature Sensor: 7500-3003

Wire Harness: 732-WH2

Voyager is the original Trail Tech Off-Road GPS, designed specifically to meet the needs of off-road riders. With Voyager you can download, record, and share maps while recording vital engine data. The 2.7 Inch TFT backlit display is ideal for viewing in any environment and gets easier to read in direct sunlight.

The map screen is monochrome, displaying maps in black and white. Plan routes on the web, then import to Voyager as gray routes ready to ride. As a new track is recording, a black line appears indicating where you have been.

Recorded tracks can be exported and combined to create entire riding areas. Need to edit trails? Voyager is supported by the free web app RIDELEADER.COM to help create, edit and save your epic rides. Download trails around your home or to plan your next vacation.

Voyager integrates with your vehicle using standard Trail Tech vehicle sensors, providing vital ride gauges such as engine temperature, RPM, battery voltage, speed/distance, and more.

At only 4.5 x 2.5 inches, Voyager is a great choice for many types of vehicles from adventure bikes to quads, UTVs and dirt bikes.

12V DC power required, make sure your vehicle has a battery.

Speed: 0-999 MPH

Distance: 0-250,000 mi

Altitude: 59,000 ft

Temperature: 0-260C

Accum. Run Time: 0-1,000,000 hr

GPS Sample Rate: 1-5 sec

External Power Input: 12V-60V DC

Internal Battery: 3.7V 900 mAh Li-Ion

Battery Life (Typical Use): 11 hours

Battery Life (100% Backlight): 6 hours

Battery Charge Time: 3-8 hours

Geodetic Datum: WGS84

GPS Chipset: MediaTek MT3329

Joystick: 5-Position High-Tactile

Wheel Sensor: Non-contact Magnet Sensor

Backlight: LED Group

Screen: 68.6mm Diagonal

Physical Dimensions: 113 x 62 x 28.2mm

Physical Weight: 172g

Max Waypoints: 300 waypoints

Max Track Points: 72,500 points

Max Route Points: 72,500 points

Max Tracks/Routes: 300 each

Kit Contents

7mm Fin Sensor: 7500-3003

Magnet Kit: 100-01

Wheel Sensor: 101-06

Mounting: 9000-1000

Power Lead: 9000-1011

Ignition Sensor Lead: 9000-1021

Micro SD Card Reader: 9000-MSDA

Micro SD Card: 9000-MSD2G

Protected by US Patent

Patent No. 8,708,205

Patent No. 8,848,356

Patent No. D635497

Patent No. D647434

Voyager is the original Trail Tech Off-Road GPS, designed specifically to meet the needs of off-road riders. With Voyager you can download, record, and share maps while recording vital engine data. The 2.7 Inch TFT backlit display is ideal for viewing in any environment and gets easier to read in direct sunlight.

The map screen is monochrome, displaying maps in black and white. Plan routes on the web, then import to Voyager as gray routes ready to ride. As a new track is recording, a black line appears indicating where you have been.

Recorded tracks can be exported and combined to create entire riding areas. Need to edit trails? Voyager is supported by the free web app RIDELEADER.COM to help create, edit and save your epic rides. Download trails around your home or to plan your next vacation.

Voyager integrates with your vehicle using standard Trail Tech vehicle sensors, providing vital ride gauges such as engine temperature, RPM, battery voltage, speed/distance, and more.

At only 4.5 x 2.5 inches, Voyager is a great choice for many types of vehicles from adventure bikes to quads, UTVs and dirt bikes.

12V DC power required, make sure your vehicle has a battery.

Speed: 0-999 MPH

Distance: 0-250,000 mi

Altitude: 59,000 ft

Temperature: 0-260C

Accum. Run Time: 0-1,000,000 hr

GPS Sample Rate: 1-5 sec

External Power Input: 12V-60V DC

Internal Battery: 3.7V 900 mAh Li-Ion

Battery Life (Typical Use): 11 hours

Battery Life (100% Backlight): 6 hours

Battery Charge Time: 3-8 hours

Geodetic Datum: WGS84

GPS Chipset: MediaTek MT3329

Joystick: 5-Position High-Tactile

Wheel Sensor: Non-contact Magnet Sensor

Backlight: LED Group

Screen: 68.6mm Diagonal

Physical Dimensions: 113 x 62 x 28.2mm

Physical Weight: 172g

Max Waypoints: 300 waypoints

Max Track Points: 72,500 points

Max Route Points: 72,500 points

Max Tracks/Routes: 300 each

Kit Contents

8mm Fin Sensor: 7500-3008

Magnet Kit: 100-01

Wheel Sensor: 101-06

Mounting: 9000-1000

Power Lead: 9000-1011

Ignition Sensor Lead: 9000-1021

Micro SD Card Reader: 9000-MSDA

Micro SD Card: 9000-MSD2G

Protected by US Patent

Patent No. 8,708,205

Patent No. 8,848,356

Patent No. D635497

Patent No. D647434

Domino 2 Stable Position Switch Black

#0364AB.5D

Functions: MAP1/MAP2 or engine START/STOP or ON/OFF

Bike typology: Universal

Connector: None

Cable length: 1m wire harness without connector

Temperature Sensor: Cylinder Head 10mm CHT Sensor for air cooled machines.

Type

Engine Temperature Air Cooled Machines

Spark Plug or Engine Bolt

Physical Features

Wire Length 550mm

(21%u201D)

Diameter 10mm