• Universal tachometer with RPM reader, launch control and shift warning functionality              
• LEDs allow you to read revolutions per minute (RPM) in real time, giving you full control
• The Launch Control function ensures the rider gets the perfect start, thanks to LEDs that indicate the ideal moment to start at maximum power and control, depending on one's preferences
• The shift warning function uses LEDs to signal the rider the right time to shift gears and release full engine power. the LEDs will flash at the desired rpm
• Equipped with a convenient button for adjusting the necessary settings, which can be positioned on the handlebars
• Front guard integrated into the aluminum support base, with the protective function from bumps and debris
• Water-resistant
• Applies to the front of the fender, via an aluminum bracket and screws in the mounting kit
• Can be applied to any fender, with direct power supply to the battery. RPM reading is via electrical pulses detectable from the spark plug power cable
• Printed logo on tachometer and lasered on bracket

Can be mounted on cross / enduro / motard / ATV / moped / trial

DETAILS:

No power supply required

Simple installation with double-sided tape

Battery included

It turns on automatically with the engine%u2019s vibrations

2 hour-counter functions: 1 total 1 partially resettable

Lock function to prevent its activation during transport

Waterproof IP68

Possibility to improve or reduce sensitivity

0.1 hour resolution

Wireless operation

Domino 2 Stable Position Switch Black

#0364AB.5D

Functions: MAP1/MAP2 or engine START/STOP or ON/OFF

Bike typology: Universal

Connector: None

Cable length: 1m wire harness without connector

Domino Switch Block

#0298AA.8B

Functions: horn, off/low/high, engine stop, turn, with 1 m long wire harness without connector

Application: Universal

Connector: None

Cable length: 1 m

Domino Kill Switch

#0250AB.9B

Domino Kill Switch with wiring, functions: engine stop

Connector: tipo Molex 2 vie p/m

Cable length: 690 mm

Domino Switch Block

Side: Left

Functions: horn, tree position lights, low/high beam, turn

Connector: Molex 9 vie P/M

Cable length: 550mm

Domino Engine Start/Kill Switch

Functions: Engine stop, Engine start

Bike typology: Universal

Connector: Molex 4 vie P/M

Cable length: 590 mm

Domino Engine Start/Stop Switch

#0351AB.9A

Functions: Engine stop (2 stable positions), Engine start

Bike typology: Universal

Connector: None

Cable length: 1m wire harness without connector

Domino Engine Start/Stop Switch

Function: Engine start, engine stop (2 stable positions)

Side: Right

Wiring: YES

Wire Length: 590 mm

Connector: Molex 4-way P / M

Domino Start Switch

#0254AB.9B

Domino Start Switch with wiring, functions: engine start

Connector: Sumitomo 2 vie P/M

Cable length: 430 mm

Voyager Top Triple Clamp Mount Bracket for perches bolted on and 100-106mm spacing.

Voyager Top Mount Protector

Protector works Voyager ONLY Not Voyager Pro.

Protector will include the External Antenna 9000-EAA

Voyager/Vapor Ignition Sensor 2550mm Length (100").

Type

Voyager & Vapor ignition Sensor

Physical Features

Wire Length 1800mm

(70.87%u201D)

Fits: Generic

Trail Techs TTV Temperature Switching Fan Kit monitors your KTM or Husqvarnas cooling system performance and automatically activates the fan to keep engine at optimum temperature range.

Custom adjustment of temperature trigger point.

- Plugs into most stock KTM harnesses

- No cutting of fluid lines

- 30 watt draw

- 4 Inch fan

- 12V DC Only

- Temperature: (-)40 to 300 Degrees Celsius

- Physical Weight: 652 Grams

- Physical Dimensions: 210 X 120 X 85MM

Contents

4 Inch SPAL Fan: 7051-FN1

TTV Temperature Gauge: 732-S00

Radiator Bracket: 7051-BR05

Temperature Sensor: 7500-3005

Wire Harness: 732-WH1

Magnet Kit: KTM motorcycles.

Head Unit Only (No Sensors).

Micro SD Card Reader.

Speed sensor cable extension 600mm (24") long.

Type

Extension for Speedometer Cable Male to Female

Physical Features

Wire Length 600mm

(24%u201D)

Temperature sensor extension lead 600mm (24") long.

Type

Extension for Temperature Sensor Male to Female

Physical Features

Wire Length 600mm

(24%u201D)

Temperature Sensor: Cylinder Head 10mm CHT Sensor for air cooled machines.

Type

Engine Temperature Air Cooled Machines

Spark Plug or Engine Bolt

Physical Features

Wire Length 550mm

(21%u201D)

Diameter 10mm

Includes eight indicator lights for customization: low beam, high beam, turn arrow left, turn arrow right, turn arrow left and right (hazard), oil, Neutral and Reverse.

Hitting the streets?

The Indicator Dashboard gives you what you need to get your dash street legal, from high beam, turn signals, oil, and beyond.

With eight different indicators included, customize your dashboard your own way.

Attaches to Trail Tech Vapor/Striker and installs easily on the triple clamp of most motorcycles.

*This is a universal part and does not include model specific instructions.

Temperature Sensor: 22mm Inline Water Temp Sensor.

Type

Engine Temperature Water Cooled Machines

Inline

Physical Features

Wire Length 900mm

(35%u201D)

Diameter 22mm (0.87")

Temperature Sensor: 25mm Inline Water Temp Sensor.

Type

Engine Temperature Water Cooled Machines

Inline

Physical Features

Wire Length 900mm

(35%u201D)

Diameter 25mm (0.98")

Temperature Sensor: Radiator Fin, 7mm Wide, 550mm Long

-No cutting of fluid lines, or draining radiator

-Fits most stock KTM Freeride and Honda radiators

-Easy install

-Great sensor for Voyager, Vapor, Striker and TTO gauges.

Type

Engine Temperature Water Cooled Machines

Radiator Fin

Physical Features

Wire Length 550mm

(21%u201D)

Width 7mm

Temperature Sensor: 16mm Inline Water Temp Sensor.

Type

Engine Temperature Water Cooled Machines

Inline

Physical Features

Wire Length 550mm

Diameter 16mm (.063")