Replacement LED boards for the LED Vision and LED Vision HP headlights. Each board is a direct replacement for the 10 LED cluster on each side of the headlight. Sold as a set (pair).

Acerbis replacement boot buckle for Acerbis Adventure Boot.

To fit Boot Part No. 22200

Acerbis replacement boot strap kit for Acerbis Adventure Boot.

To fit Boot Part No. 22200

Trail Tech kickstands are custom designed for both Enduro and MX style motorcycles. Strong, Lightweight and Attractive. Trail Tech kickstands are slightly longer than most stock kickstand and have a wide based foot for trail riding.

Foot: Aluminium Re-enforced High Impact Nylon Foot at Base of Stand

OEM Replacement Leg ONLY

Voyager - Replacement Lithium-Ion Battery

The battery is not meant to be replaced regularly.

Head Unit Only (No Sensors).

Voyager Pro plastic handlebar mounting hardware kit for 7/8 and 1-1/8 bars.

Included in Voyager Pro kits.

Patented mount design has two points of articulation, enabling a wide variety of mounting positions.

Made from special high strength materials to withstand the rigors of powersports.

Includes screws and bolts to attach a Voyager Pro dock.

Comes with four M4x14mm screws to attach the Voyager Pro dock.

Included in Voyager Pro kits.

Voyager Pro GPS unit not included.

High-impact black foot for use with square Trail Tech kickstand leg

Note:

Part number 5925-foot (Black) only fits the square Trail Tech kickstands

1. With the kickstand arm mounted to the motorcycle hold the replacement foot near the insertion hole and note rotation to allow the foot to lay flat on the ground once installed.

2. Remove the kickstand arm from bike

3. Remove old foot. This is usually accomplished by putting the foot in a vise and inserting a long screw driver or arm in the pivot bolt mounting hole and twisting it loose while pulling. To ease removal of the foot heat can be applied to the leg with a heat gun.

4. Clean and remove all oils and residue form the new foot and the kickstand foot hole

5. Use threadlocker (Surlok 1270) on the entire ribbed area that fits into the kickstand cavity to glue the foot in place

6. To insert the foot we recommend using a press. Other methods can be used. Make sure the rotation is correct and push the foot into place until it is fully bottomed against the lower flange. IMPORTANT: ALWAYS USE EYE PROTECTION WHEN USING A PRESS OR HAMMER OPERATION.

7. Wipe clean all remaining loctite

8. Remount arm to bike and insure the rotation of the foot is correct. If not use a soft jaw vice to hold the foot and twist it to the correct rotation.

9. Allow 24 hours before use of the kickstand.

Includes oring and screws

Trail Tech kickstands are custom designed for both Enduro and MX style motorcycles. Strong, Lightweight and Attractive. Trail Tech kickstands are slightly longer than most stock kickstand and have a wide based foot for trail riding.

Foot: Aluminium Re-enforced High Impact Nylon Foot at Base of Stand

OEM Replacement Leg ONLY