The Acerbis 2.0 Chain Guide Block easily replaces the entire O.E.M. unit and ensures durability and high resistance to shock and wear from the chain. Made of PA6, it is made of two parts that allow installation without removing the chain.
- 100% PA6 Construction.
- Highly resistant to shock and chain wear.
- Made of two pieces, allowing it to be mounted without removing the chain.
- In the event of collision or contact with roost, PA6 Material wont bend.
- Weight: 200 grams.
- Replaceable Inserts also Available. Part Sold Separately.
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
Acerbis fuel tanks are designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service with the proper care.
All Acerbis fuel tanks will include an Acerbis Gas Cap, required Mounting Kit (If Applicable), and Vent Hose. Applications that require special fuel line Y-fittings and petcocks will come with the tank. EFI tanks do not come with a new fuel pump and are designed to accept the stock assembly.
- Constructed of Impact and Abrasion Resistant Polyurethane.
- Allows for Greater Fuel Capacity.
- Slim Profile.
- Excellent Fit.
- Gas Cap and Vent Hose Included.
- Includes Mounting Kit & Hardware if Applicable.
The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.
Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.
The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.
Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.
The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.
Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.
The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.
- Closed Hand Guard
- Steel Bar
- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar
- Steel expander for tighter fastening and to oppose torsion in case of impact
- Dual Injected Covers
- Application: Direct mount for specific motorcycle as listed
The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.
- Closed Hand Guard
- Steel Bar
- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar
- Steel expander for tighter fastening and to oppose torsion in case of impact
- Dual Injected Covers
- Application: Direct mount for specific motorcycle as listed
The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.
- Closed Hand Guard
- Steel Bar
- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar
- Steel expander for tighter fastening and to oppose torsion in case of impact
- Dual Injected Covers
- Application: Direct mount for specific motorcycle as listed
Protect your Motor Crankcase and Ignition/Clutch Covers against wear from Boots, Impacts, Dirt, Mud, and other Debris with Acerbis X-Power Cover Kits.
- Moulded openings to access the Filter Cover and Oil Cap
- Easy to install by utilising the original Crankcase and Ignition/Clutch Cover Bolts
- Resistant to High Temperatures
- Slim Profile designed not to interfere with Boots and Riding Position
- Compatible with ACERBIS Skid plates
Right side: Provides protection for the Clutch Cover, Water Pump, and Lower Casing
Left side: Provides protection to the Ignition Cover and Clutch Actuator
BlackBird Racing Complete Seat
Standard height
Includes
BlackBird Racing Gripper Seat cover
BlackBird Racing Seat Foam
Seat Base
Comes fully assembled
The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.
The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.
The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.
It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.
Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.
The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.
High Quality product made and assembled in Italy.
The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.
The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.
The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.
It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.
Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.
The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.
High Quality product made and assembled in Italy.
Kite Parts Flex Levers
Lever shape designed for maximum ergonomic comfort
Aircraft grade aluminium
Made from billet using CNC machining
Strong and durable flex mechanism
Kite Parts Flex Levers
Lever shape designed for maximum ergonomic comfort
Aircraft grade aluminium
Made from billet using CNC machining
Strong and durable flex mechanism