Trail Techs TTO Temperature Switching Fan Kit monitors your KTM & Husqvarnas cooling system performance and automatically activates the fan to keep engine at optimum temperature range.

- Custom adjustment of temperature trigger point

- No cutting of fluid lines with included fin sensor

- 30 watt draw

- 4 Inch fan

- 12V DC ONLY

- Temperature: (-)40 to 300 Degrees Celsius

- Physical Weight: 652 Grams

- Physical Dimensions: 109 x 109 x 48mm

NOTE: Please make sure bike has necessary power available.

On bikes that have a regulated thermostatically controlled harness (this includes all new KTM and Husqvarna EFI 2 strokes) you will need to install the included wire harness back to the battery and attached the fan kit to that wire harness.

Contents

A Inch SPAL Fan: 7051-FN1

TTV Temperature Gauge: 732-S00

Radiator Bracket: 7051-BR11

Temperature Sensor: 7500-3007

Wire Harness: 732-WH1

Voyager - Replacement Lithium-Ion Battery

The battery is not meant to be replaced regularly.

Voyager Top Mount Protector

Protector works Voyager ONLY Not Voyager Pro.

Protector will include the External Antenna 9000-EAA

Voyager Multiple Mount Protector (Black)

Protector works Voyager ONLY Not Voyager Pro.

Triple clamp mounting bracket. Mount Voyager to front of triple clamp of most off-road motorcycles.

Fits most KTMs and other motorcycles where the number plate screws into the front of the triple clamp. If a headlight or number plate spacer is present, there should be plenty of room. On some models with a very close number plate, some modifications may be necessary (add spacer or notch the number plate.)

Digital gauge sold separate.

Voyager/Vapor handlebar mounting hardware. Included in every Voyager kit. Fits 1-1/8'' - 7/8'' handlebars.

Positions Voyager/Vapor in the center of the controls, in the safe zone below the bars.

Type

Handlebar Mounting Hardware For Voyager GPS

Physical Features

Handlebar Diameters 7/8''

1-1/8''

Voyager Top Triple Clamp Mount Bracket for perches bolted on and 100-106mm spacing.

Temperature Sensor: 25mm Inline Water Temp Sensor.

Type

Engine Temperature Water Cooled Machines

Inline

Physical Features

Wire Length 900mm

(35%u201D)

Diameter 25mm (0.98")

Temperature Sensor: 19mm Inline Water Temp Sensor.

Type

Engine Temperature Water Cooled Machines

Inline

Physical Features

Wire Length 550mm

(21%u201D)

Diameter 19mm (0.75")

Temperature Sensor: 22mm Inline Water Temp Sensor.

Type

Engine Temperature Water Cooled Machines

Inline

Physical Features

Wire Length 900mm

(35%u201D)

Diameter 22mm (0.87")

Temperature Sensor: Cylinder Head 12mm CHT Sensor for air cooled machines.

Type

Engine Temperature Air Cooled Machines

Spark Plug or Engine Bolt

Physical Features

Wire Length 550mm

(21%u201D)

Diameter 12mm

Fits:

KTM 08-10 ATV XC/SX 450/505/525

Honda Rancher (4WD)

Yamaha All Years TW200

Yamaha 87-09 Banshee

Yamaha 87-06 Blaster

Yamaha 08-15 Grizzly 450/700

Yamaha 05-15 Raptor 250/250R/350

Yamaha 01-05 Raptor 660

Yamaha 06-15 Raptor 700

Yamaha 85-04 Warrior

Yamaha 95-10 Wolverine

Yamaha 04-14 YFZ450

Yamaha 09-15 YFZ450R/X

Yamaha 04-08 Rhino UTV

Suzuki All Years LT-Z 400

Suzuki 06-09 LT-R 450

Kawasaki 02-08 KFX 400

Kawasaki 08-15 Teryz UTV

Polaris 06-12 Outlaw 450/500/525

Polaris 03-08 Predator

Polaris All Years Trailblazer (2WD)

Polaris All Years Trail Boss

Polaris 14-15 Scrambler 850

Polaris 08-15 Ranger RZR/RZRS/RZR4/RZR 800/900/1000 UTV

Bombardier 00-08 DS 650

Artic Cat 13-15 Wildcat 1000

Drum Brakes

CAN AM 08-13 DS 450

Physical Features

Wire Length 1350mm

(53%u201D)

Fits:

Generic Inverted Forks All Years

Physical Features

Wire Length 1450mm

(57%u201D)

Temperature Sensor: Cylinder Head 10mm CHT Sensor for air cooled machines.

Type

Engine Temperature Air Cooled Machines

Spark Plug or Engine Bolt

Physical Features

Wire Length 550mm

(21%u201D)

Diameter 10mm

Fits:

Generic Conventional Forks

Physical Features

Wire Length 1450mm

Mounting bracket for Vapor/Striker, vertical surface attachment.

Ideal for mounting to KTM.

Vapor/Striker Front Triple Clamp Protector (KTM)

The TTO Digital Temperature Gauge allows you to easily monitor your engine's temperature ensuring you that your engine is not over heating.

• Easy to read LCD display and an ultra-thin design.
• The LCD display lets you to easily view all gauge readings regardless of the angle or lighting conditions.
• Surface mount for easy install, comes with double sided VHB tape or can be bolted on
• -40°-300°C/575°F
• Black case, orange version sold separate

Battery Life 5 Years

Temperature Sensor: Radiator Fin, 10mm Wide, 550mm Long

-No cutting of fluid lines, or draining radiator

-Fits most stock KTM, Beta, Gas Gas, Husaberg, Husqvarna radiators

-Easy install

-Great sensor for Voyager, Vapor, Striker and TTO gauges.

Type

Engine Temperature Water Cooled Machines

Radiator Fin

Physical Features

Wire Length 550mm

(21%u201D)

Width 10mm

Temperature sensor extension lead 1200mm (48") long.

Type

Extension for Temperature Sensor Male to Female

Physical Features

Wire Length 1200mm

(48%u201D)

Temperature sensor extension lead 1800mm (72") long.

Type

Extension for Temperature Sensor Male to Female

Physical Features

Wire Length 1800mm

(72%u201D)

Temperature sensor extension lead 600mm (24") long.

Type

Extension for Temperature Sensor Male to Female

Physical Features

Wire Length 600mm

(24%u201D)

• 100 Watt DC
• Trail Tech stators replace the OEM stator.
• Trail Tech stators increase power output significantly.
• Custom made by Trail Tech, not purchased from bike manufacturers and rewound.
• DC stators compatible with Trail Tech lighting systems of equal or lesser power
• Manufactured with superior craftsmanship and performance for serious riders

Speed sensor cable extension 600mm (24") long.

Type

Extension for Speedometer Cable Male to Female

Physical Features

Wire Length 600mm

(24%u201D)

Micro SD Card Reader.